Connect Nintendo Switch Pro Controller to PC (Windows)
To start pairing, press and hold the Sync button on the top edge of the pad. Bluetooth (HID) or USB pairing in a few steps.
Step-by-step
Put the Nintendo Switch Pro Controller into pairing mode by press and hold the Sync button on the top edge of the pad, then follow the platform steps below.
The Pro Controller reports as a generic Bluetooth HID. Button labels are Nintendo-style (A/B and X/Y swapped) on PC and macOS, so a mapping layer such as Steam Input is recommended for native labels.
The Switch Pro Controller's strongest quirk is its gyro: the pad reports a six-axis IMU over HID, and on PC that motion data either shows up as a secondary device or requires Steam Input to remap — without a layer, most games never see the gyro at all, so expect motion aiming to be absent until you configure it. The Pro Controller also has a long-standing battery-reporting bug on PC where the OS shows the wrong charge percentage; treat the pad's own battery LED as the source of truth. Because button labels are Nintendo-oriented, A/B and X/Y are physically swapped relative to Xbox muscle memory, so verify the layout in a tester before a ranked session rather than trusting the on-screen prompts.
Press and hold the controller's pair button until its LED starts blinking.
Open Windows Settings → Bluetooth & devices → Add device → Bluetooth, and select the controller from the list.
On first connect, the OS may install generic HID drivers; game-launcher input layers (Steam Input, Windows Game Bar) usually pick it up automatically.
Verify the connection: open a browser gamepad tester and confirm the controller reports buttons and sticks. If the trigger only registers on the "wrong" axis, use the tester to confirm which input the game will see.
Official reference: Nintendo Support ↗
Quick answers
How do I connect the Nintendo Switch Pro Controller to PC (Windows)?
Put the Nintendo Switch Pro Controller in pairing mode (hold the pairing button until the LED flashes), then pair it from PC (Windows)'s Bluetooth settings. For a stable wired connection, connect the controller by USB instead.
Why isn't my Nintendo Switch Pro Controller being detected by PC (Windows)?
Most detection failures are one of: Bluetooth batteries draining, a stale pairing entry, or the pad connected to another device. Remove the old pairing, re-pair, and confirm with a browser tester before blaming the controller.
Does the Nintendo Switch Pro Controller work with a drifting stick on PC (Windows)?
It connects the same way — drift is a sensor issue reported by the gamepad, not a platform issue. Run our Stick Drift Detector after pairing to confirm the measurement.